go_study/fabric-main/docs/source/operations_service.rst

The Operations Service
======================

The peer and the orderer host an HTTP server that offers a RESTful "operations"
API. This API is unrelated to the Fabric network services and is intended to be
used by operators, not administrators or "users" of the network.

The API exposes the following capabilities:

- Log level management
- Health checks
- Prometheus target for operational metrics (when configured)
- Endpoint for retrieving version information

Configuring the Operations Service
----------------------------------

The operations service requires two basic pieces of configuration:

- The **address** and **port** to listen on.
- The **TLS certificates** and **keys** to use for authentication and encryption.
  Note, **these certificates should be generated by a separate and dedicated CA**.
  Do not use a CA that has generated certificates for any organizations
  in any channels.

Peer
~~~~

For each peer, the operations server can be configured in the ``operations``
section of ``core.yaml``:

.. code:: yaml

  operations:
    # host and port for the operations server
    listenAddress: 127.0.0.1:9443

    # TLS configuration for the operations endpoint
    tls:
      # TLS enabled
      enabled: true

      # path to PEM encoded server certificate for the operations server
      cert:
        file: tls/server.crt

      # path to PEM encoded server key for the operations server
      key:
        file: tls/server.key

      # most operations service endpoints require client authentication when TLS
      # is enabled. clientAuthRequired requires client certificate authentication
      # at the TLS layer to access all resources.
      clientAuthRequired: false

      # paths to PEM encoded ca certificates to trust for client authentication
      clientRootCAs:
        files: []

The ``listenAddress`` key defines the host and port that the operation server
will listen on. If the server should listen on all addresses, the host portion
can be omitted.

The ``tls`` section is used to indicate whether or not TLS is enabled for the
operations service, the location of the service's certificate and private key,
and the locations of certificate authority root certificates that should be
trusted for client authentication. When ``enabled`` is true, most of the operations
service endpoints require client authentication, therefore
``clientRootCAs.files`` must be set. When ``clientAuthRequired`` is ``true``,
the TLS layer will require clients to provide a certificate for authentication
on every request. See Operations Security section below for more details.

Orderer
~~~~~~~

For each orderer, the operations server can be configured in the `Operations`
section of ``orderer.yaml``:

.. code:: yaml

  Operations:
    # host and port for the operations server
    ListenAddress: 127.0.0.1:8443

    # TLS configuration for the operations endpoint
    TLS:
      # TLS enabled
      Enabled: true

      # PrivateKey: PEM-encoded tls key for the operations endpoint
      PrivateKey: tls/server.key

      # Certificate governs the file location of the server TLS certificate.
      Certificate: tls/server.crt

      # Paths to PEM encoded ca certificates to trust for client authentication
      ClientRootCAs: []

      # Most operations service endpoints require client authentication when TLS
      # is enabled. ClientAuthRequired requires client certificate authentication
      # at the TLS layer to access all resources.
      ClientAuthRequired: false

The ``ListenAddress`` key defines the host and port that the operations server
will listen on. If the server should listen on all addresses, the host portion
can be omitted.

The ``TLS`` section is used to indicate whether or not TLS is enabled for the
operations service, the location of the service's certificate and private key,
and the locations of certificate authority root certificates that should be
trusted for client authentication.   When ``Enabled`` is true, most of the operations
service endpoints require client authentication, therefore
``RootCAs`` must be set. When ``ClientAuthRequired`` is ``true``,
the TLS layer will require clients to provide a certificate for authentication
on every request. See Operations Security section below for more details.

Operations Security
~~~~~~~~~~~~~~~~~~~

As the operations service is focused on operations and intentionally unrelated
to the Fabric network, it does not use the Membership Services Provider for
access control. Instead, the operations service relies entirely on mutual TLS with
client certificate authentication.

When TLS is disabled, authorization is bypassed and any client that can
connect to the operations endpoint will be able to use the API.

When TLS is enabled, a valid client certificate must be provided in order to
access the logging and metrics services. The health check and version services
only require a valid client certificate when ``clientAuthRequired`` is enabled,
since these services are often used by network operators and only provide read-only information.

When ``clientAuthRequired`` is enabled, the TLS layer will also require
a valid client certificate regardless of the resource being accessed.

Log Level Management
--------------------

The operations service provides a ``/logspec`` resource that operators can use to
manage the active logging spec for a peer or orderer. The resource is a
conventional REST resource and supports ``GET`` and ``PUT`` requests.

When a ``GET /logspec`` request is received by the operations service, it will
respond with a JSON payload that contains the current logging specification:

.. code:: json

  {"spec":"info"}

When a ``PUT /logspec`` request is received by the operations service, it will
read the body as a JSON payload. The payload must consist of a single attribute
named ``spec``.

.. code:: json

  {"spec":"chaincode=debug:info"}

If the spec is activated successfully, the service will respond with a ``204 "No Content"``
response. If an error occurs, the service will respond with a ``400 "Bad Request"``
and an error payload:

.. code:: json

  {"error":"error message"}

When TLS is enabled, a valid client certificate is required to use this
service regardless of whether ``clientAuthRequired`` is set to ``true`` at the TLS level.

Metrics
-------

Some components of the Fabric peer and orderer expose metrics that can help
provide insight into the behavior of the system. Operators and administrators
can use this information to better understand how the system is performing
over time.

Configuring Metrics
~~~~~~~~~~~~~~~~~~~

Fabric provides two ways to expose metrics: a **pull** model based on Prometheus
and a **push** model based on StatsD.

Prometheus
~~~~~~~~~~

A typical Prometheus deployment scrapes metrics by requesting them from an HTTP
endpoint exposed by instrumented targets. As Prometheus is responsible for
requesting the metrics, it is considered a pull system.

When configured, a Fabric peer or orderer will present a ``/metrics`` resource
on the operations service.

When TLS is enabled, a valid client certificate is required to use this
service regardless of whether ``clientAuthRequired`` is set to ``true`` at the TLS level.

Peer
^^^^

A peer can be configured to expose a ``/metrics`` endpoint for Prometheus to
scrape by setting the metrics provider to ``prometheus`` in the ``metrics`` section
of ``core.yaml``.

.. code:: yaml

  metrics:
    provider: prometheus

Orderer
^^^^^^^

An orderer can be configured to expose a ``/metrics`` endpoint for Prometheus to
scrape by setting the metrics provider to ``prometheus`` in the ``Metrics``
section of ``orderer.yaml``.

.. code:: yaml

  Metrics:
    Provider: prometheus

StatsD
~~~~~~

StatsD is a simple statistics aggregation daemon. Metrics are sent to a
``statsd`` daemon where they are collected, aggregated, and pushed to a backend
for visualization and alerting. As this model requires instrumented processes
to send metrics data to StatsD, this is considered a push system.

Peer
^^^^

A peer can be configured to send metrics to StatsD by setting the metrics
provider to ``statsd`` in the ``metrics`` section of ``core.yaml``. The ``statsd``
subsection must also be configured with the address of the StatsD daemon, the
network type to use (``tcp`` or ``udp``), and how often to send the metrics. An
optional ``prefix`` may be specified to help differentiate the source of the
metrics --- for example, differentiating metrics coming from separate peers ---
that would be prepended to all generated metrics.

.. code:: yaml

  metrics:
    provider: statsd
    statsd:
      network: udp
      address: 127.0.0.1:8125
      writeInterval: 10s
      prefix: peer-0

Orderer
^^^^^^^

An orderer can be configured to send metrics to StatsD by setting the metrics
provider to ``statsd`` in the ``Metrics`` section of ``orderer.yaml``. The ``Statsd``
subsection must also be configured with the address of the StatsD daemon, the
network type to use (``tcp`` or ``udp``), and how often to send the metrics. An
optional ``prefix`` may be specified to help differentiate the source of the
metrics.

.. code:: yaml

  Metrics:
      Provider: statsd
      Statsd:
        Network: udp
        Address: 127.0.0.1:8125
        WriteInterval: 30s
        Prefix: org-orderer

For a look at the different metrics that are generated, check out
:doc:`metrics_reference`.

Health Checks
-------------

The operations service provides a ``/healthz`` resource that operators can use to
help determine the liveness and health of peers and orderers. The resource is
a conventional REST resource that supports GET requests. The implementation is
intended to be compatible with the liveness probe model used by Kubernetes but
can be used in other contexts.

When a ``GET /healthz`` request is received, the operations service will call all
registered health checkers for the process to ensure all registered services and
dependencies are available. When all of the health checkers
return successfully, the operations service will respond with a ``200 "OK"`` and a
JSON body:

.. code:: json

  {
    "status": "OK",
    "time": "2009-11-10T23:00:00Z"
  }

If one or more of the health checkers returns an error, the operations service
will respond with a ``503 "Service Unavailable"`` and a JSON body that includes
information about which health checker failed:

.. code:: json

  {
    "status": "Service Unavailable",
    "time": "2009-11-10T23:00:00Z",
    "failed_checks": [
      {
        "component": "docker",
        "reason": "failed to connect to Docker daemon: invalid endpoint"
      }
    ]
  }

The peer has the following health checks available:

- Docker daemon health check (if a Docker endpoint is configured for chaincodes)
- CouchDB health check (if CouchDB is configured as the state database)

When TLS is enabled, a valid client certificate is not required to use this
service unless ``clientAuthRequired`` is set to ``true``.

Version
-------

The orderer and peer both expose a ``/version`` endpoint. This endpoint
serves a JSON document containing the orderer or peer version and the commit
SHA on which the release was created.

When TLS is enabled, a valid client certificate is not required to use this
service unless ``clientAuthRequired`` is set to ``true``.

.. Licensed under Creative Commons Attribution 4.0 International License
   https://creativecommons.org/licenses/by/4.0/